เว็บพนันออนไลน์ เว็บตรงไม่ผ่านเอเย่นต์ วาล์วเครื่องกล (Mechanical Valves)

Product code: 6.01.12.N

Modern industrial applications constantly require more sophisticated and better performing pneumatic components . Flexibility and adaptability are key factor when designing a machine. The possibility to change the application parameter during operation such as for example the speed of a cylinder or the force generated by a rotary actuator are beneficial to the designer.

Modern industrial applications require increasingly high performances from their pneumatic components. For example, the speed and thrust of a pneumatic actuator may need to be varied. These parameters often need to be modified dynamically while an operation is running.

Coalescing filter
Available in 4 sizes with flow rates up to 3000 Nl/min and connections from 1/8” to 1”
Filtering cartridge with filtration grade of 0,01 μm
Filtering performances 99.97% (particles up to 0.01 μm)
Bowls screwed to the body (Size 1)
Bowl assembly via bayonet type quick coupling mechanism with safety button (Size 2 – Size 3 – Size 4)
Semi-automatic or automatic drain
Atex certification (II 2GD o II 3GD) on request

Aluminium body
Wall mounting possibility with M8 screws
Filtering cartridge made of HDPE available in three different filtration grades (5μm, 20μm, 50μm)
Filter cartridge can be regenerated by washing / blowing it or replaced
With blind metal bowl
Bowl assembly via bayonet type quick coupling mechanism with safety button
Automatic condensation drain

Mechanics with base for solenoid to be used where an electric pilot system is required.

3/2 N.C. poppet valve for entering and exhausting the circuit
It allows to pneumatically supply the part of the system downstream of the valve
Opening and closing of the valve via solenoid operator
The supply pressure must be minimum 2 bars or higher
It is possible to produce the external supplied solenoid version by mounting the 305.10.05 between the valve main body and the solenoid pilot valve.
The air supply can only be done via port 1
Ensure that the downstream air consumption will not cause a pressure drop which could result in the pressure falling below the minimum operating values.
If the pressure inside the valve falls below 2 bars, the valve might shut off.
Atex certification (II 2GD o II 3GD) on request

Double filter action: air flow centrifugation and filter element
Filtering cartridge made of HDPE available in three different filtration grades (5μm, 20μm, 50μm)
Filter cartridge can be regenerated by washing / blowing it or replaced
Semi-automatic or automatic drain
Diaphragm pressure regulator with relieving
Low histeresis rolling diaphragm and balanced spool
Available in four pressure ranges up to 12 bar

Filter – diaphragm pressure regulator with relieving Low histeresis rolling diaphragm and balanced spool Filtering element made of HDPE available in 3 different filtration grades (5μm, 20μm, 50μm) Semi-automatic or automatic drain Available in four pressure ranges up to 12 bar Oil mist lubricator Variable orifice size in function of the flow rate Oil quantity regulation mechanism and oil quantity visualization dome made of polycarbonate (PC) Oil refill plug Available with low level electrical sensor NO and NC Bowls screwed to the body (Size 1) Bowl assembly via bayonet type quick coupling mechanism with safety button (Size 2 – Size 3) Atex certification (II 2GD o II 3GD) on request

Filter – diaphragm pressure regulator with relieving
Available in 3 sizes with flow rates up to 3500 Nl/min and connections from 1/8” to 3/4”
Low histeresis rolling diaphragm and balanced spool
Filtering element made of HDPE available in 3 different filtration grades (5μm, 20μm and 50μm)
Bowls screwed to the body (Size 1)
Bowl assembly via bayonet type quick coupling mechanism with safety button (Size 2 – Size 3)
Semi-automatic or automatic drain
Available in four pressure ranges up to 12 bar
Fitted with panel mounting locking ring
Atex certification (II 2GD o II 3GD) on request

PNEUMAX – 1/2″ BSPP Flow Control Valve